MDPE Systems

The FloPlast `Alprene` range offers everything you could ask of a compression fitting. The fittings are suitable for use below ground on cold water services with polyehylene pipes manufactured in accordance with the requirements of BS 6572:1985 (BLUE)

Features:-

• Immediately recognisable by its blue nut and black body.
  
  
• High impact resistant Body and Nut which enables it to absorb thermal and mechanical stress.
  
  
• The fittings have a co-polymer polypropylene Body, Nut and Thrust Ring, Acetal Grab Ring and Nitrile Seal.
  
  
• Excellent pressure resistance, tested to 48 Bars. Comfortably exceeds the performance requirements of UK Water Bylaws Scheme.
  
  
• Tested and approved by various testing institutes worldwide. Water Bylaws Scheme Approved product. (20mm to 63mm range of fittings)
  
  
• Simple and quick to connect : to fit the pipe you don’t need to dismantle the connector you don’t need to chamfer the pipe no time wasted; just cut the pipe, lubricate the seal, undo the nut a few turns, push the pipe in as far as it will go, tighten the nut and it’s done!