FloPlast ‘Supreme’ range offers everything you could ask of a compression fitting. They are suitable for use below ground on cold water services with polyethylene pipes manufactured in accordance with the requirements of BS EN 12201 - 2 : 2011 (BLUE).
- High Impact resistant Body and Nut which enables it to absorb thermal and mechanical stress.
- The fittings have a co-polymer polypropylene Body, Body Nut and Guide Ring, Acetal Grab Ring and Nitrile Seal.
- Excellent pressure resistance, tested to 48 Bars. Comfortably exceeds the performance requirements of UK Water Byelaws Scheme. Tested and approved by various testing institutes worldwide. Water Regulations Advisory Scheme Approved (WRAS) product. (20mm to 110mm range of fittings)
- Simple and quick to connect: To fit the pipe you don’t need to dismantle the connector, you don’t need to chamfer the pipe, you won’t lose any pieces on the job site, no time wasted; just cut the pipe, insert, pipe liner, lubricate the seal, undo the nut a few turns, push the pipe in as far as it will go, tighten the nut and it’s done!
Assembly_Instructions.pdf (619KB) - Assembly Instructions
EMS_538445.pdf (709KB) - EMS 538445
Material_Safety_Data_Sheet_-_MDPE_fittings.pdf (236KB) - Material Safety Data Sheet - MDPE fittings
MDPE_Brochure_2014.pdf (3.97MB) - MDPE Brochure
Universal_Adaptor_Application.pdf (373KB) - Universal Adaptor Application
MDPE_Pipe.pdf (166KB) - MDPE Pipe
MDPE_Explained.pdf (204KB) - MDPE Explained