"Cast Iron" Style

New generation “Cast Iron” style Rainwater System, comes with a 20 Year Colour and Performance Guarantee.

● New generation `Cast Iron` style Rainwater System.

● 20 Year `Cast Iron` Colour Guarantee.

● Significant cost saving over traditional Cast Iron.

● Pre-fitted gutter seal retaining clip system for fast user friendly installation.

● Pre-lubricated seals.

● External fixing lugs on shoes and pipe sockets.

● Black fixing bolts available to complement traditional look.

● All the benefits of PVC, for quick and easy installation.

BS EN 607: 2004 – Eaves gutter fittings of PVC-U

BS EN 1462: 2004 – Brackets for eaves gutters

BS EN 12200-1 – Plastic rainwater piping systems for above ground external use – Unplasticized poly vinyl chloride (PVC-U)

BS EN 681 – Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Part 1 vulcanised rubber.

BS EN 1329-1 –Unplasticized poly vinyl chloride (PVC-U). Specifications for pipes, fittings and the system.

BS 4514 – Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum mean outside diameter, and fittings and accessories of 82.4 mm and of other sizes.

BS EN 1453 – Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure.

BS EN 681 – Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Part 1 vulcanised rubber.

Standards/Quality Control

FloPlast operates quality and environment management systems which have been assessed by BSI and comply with the requirements of both BS EN ISO 9001:2015 Certificate No. FM 501414 and BS EN ISO 14001:2015 Certificate No. EMS 538445

All products are subject to continuous quality control procedures and products manufactured to British Standard Specifications are marked accordingly.

Roof Area

Calculator

Design and installation

 
 
 
 
 
 

GUTTER FLOW CAPACITY

Gutter flow capacity is dependent upon system type, outlet position and whether gutter is laid level or to a specified fall. The table above gives the required information based upon a Rainfall intensity of 75mm per hour and recommendations from BS EN 12056-3:2000.

Single Roof.

single_roof
Calculate

Please enter details of the roof. All measurements should be in metres.

Hipped Roof
Calculate

Double Valley

Roof 1
Roof 2
Roof 3

Calculate
valley

Valley Roof

Roof 1
Roof 2

valley
Calculate