● FloPlast’s product innovation is again demonstrated with the introduction of a new 450mm Diameter Large Inspection Chamber.
● To comply with the changes to Approved Document H of The Building Regulations 2000, significant research and development has gone into the design of this unique product. The Chamber base incorporates five 110mm flexible inlets, which allow 10° of movement in any direction.
● The large inspection chamber is manufactured to BS7158.
● The plastic cover and frame can take loadings up to a maximum of 35kN. (Please ensure Sealing Rings are used in conjunction with each riser section).
BS EN 1401-1 – Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U). KM 544332 / KM 563461.
BS EN 13476-2 – Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). KM 563462.
BS EN 681 – Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications.
BS EN 124 – 2 – Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of cast iron.
BS EN 124 – 6 – Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U).
BS EN 13598-2- Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for ancillary fittings including shallow inspection chambers.
